Regarding this pole in the workplace, it is particularly useful as it makes Pai Jia no longer just look like a top pole. Whether the activities of the service industry can be monitored together is accurate, after all, this is only a business principle. The workplace here takes up a lot of the entire workplace time

The key to turning is to decompose the machining objects, usually improving machining accuracy, efficiency, and automation through machining processes such as turning or milling. The common problem with lathe workers is that they originally overlooked their understanding of the process and manufacturing accuracy, which is a kind of understanding of the process. The measuring tools used in different industries will vary later, and the measuring tools used at this stage will vary. There will also be several types of lathe tools available on the market for simple measuring tools.

Surface treatment: According to the customer's requirements for rough plating or electroplating treatment, the types of surface coatings used are divided into electrogalvanizing and spray painting.

Chassis and cabinet processing manufacturers' sheet metal processing refers to a type of home that achieves high division, low noise, low pollution, and environmental compliance through chaotic and rhythmic operation of equipment.

The size range of a weldment has visible error values (size and weight of the weldment). A weldment refers to the product that is accurately welded through the method of welding the weldment. Weldment refers to the melting point and growth of steel components during welding.

There is a certain correlation with the ideal coordinate value, such as the weld seam reinforcement and slope difference of the weldment. If the deviation is exceeded, it will affect the cutting surface quality of the weldment and the subsequent painting quality. Therefore, we not only need to master the characteristics of the welding process, but also the skills of the welding machine used in the welding process, in order to widely use various types of welding electricity.

The improvement of precision and surface quality before welding has also greatly promoted the development of fastener system manufacturers. Reason: The current is too high, or the brush solder paste is lower than the current by more than two solders, or the current is increased by 50 volts. Alloy ingots for brazing can achieve smooth welding compared to conductive rods, while the welding surface roughness is large and the surface of the welded parts is too decarburized

How to deal with the vast majority of arc welding defects: incorrect welding position; The welding current is related to the angle of the welding piece; Weld beading, grinding, or welding marks left by mechanical processing on the weldment; But during welding, it is necessary to clean the welding slag according to the regulations and use slag collection and nitriding equipment to clean the welding slag. Welding in non average areas.

Check whether the power switch, argon shield and gas control device of the welding machine are normal; If the pressure control device does not meet the requirements, and the power switch and air control device do not meet the working requirements, the closing of the fan or air control package should be turned off. If the pressure control device does not meet the requirements and the compressor of the fan or air control package rotates, the pressure should be appropriately extended. If the pressure switch status is not normal, the air control switch (curved three-dimensional design) or air control system can be replaced.